From the Designer of the Firestorm Heaters Kits comes our new and improved Ice Crusher UTV Heater Kits. We have more UTV Heater Kits and Application than anyone else! Our kits are used as OEM by some UTV manufacturers.
Ice Crusher UTV Heater Kits come with a compact yet powerful heater unit. All components are custom-made with custom laser cut, powder-coated mounting brackets to fit your model of UTV not just some generic bracket. Kits are supplied with custom CNC alloy Y hose connectors (kits requiring 5/8″ or 3/4″ Y’s are made from nylon) or other fittings as required. Kits also include coolant hoses, EZ-Coils (used to stop the hoses from kinking), hose clamps, hole saws (for the heater hoses and Vent), grommets, shut off valve (if required), a wiring loom and terminals included, templates, dash vents and duct hose, your specific mounting bracket with hardware, and instructions. Note: Kit contents differ depending on your application.
Please Note: Competent mechanical skills are required.
Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat where you need it. The heater features a three-speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engine's cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built-in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.
Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more than capable of heating 99.99% of all UTV’s
British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one-degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.
The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!
MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.
|Mid-Size Vehicle||No fitments|
|Full-Size Vehicle||No fitments|
|Crew Vehicle||No fitments|
|General Vehicle||2022 General 1000 2021 General 1000 2020 General 1000 2019 General 1000 2018 General 1000 2017 General 1000 2016 General 1000|
Our Polaris Experts are standing by, ready to answer questions or go into more detail about the features and benefits of this product, help you to explore similar or complementary products, confirm vehicle fitment and more.