While trying to fit all of your essentials into the bed of your UTV, you may be reminded of the old adage, “it’s like trying to fit a square peg into a round hole.” Essentially, it just doesn’t work. The same is true when trying to cram too much into the bed of your Side-by-Side... unless, you had 30 percent more space... allowing you to make just one trip instead of two, while all of your items are securely stored. The old adage would have been irrelevant if you simply told the originator of that statement to simply increase the receiving slot by... say... 30 percent. In that case, everything would fit just fine. With the Polaris Ranger Full Size Black Hood Rack by Moose, you gain the essential room you need to effectively carry more brush, essentials, or whatever you choose. This will maximize your safety, in addition to protecting the items, you are transporting. Constructed of a two-piece tubular steel basket that is easy to install, and doesn’t require drills or tools to get the job done. The hood rack also allows you to dump the bed when without needing to rearrange equipment, making your job much easier. Don’t go by old, outdated ideas, the Polaris Ranger Full Size Black Hood Rack is the modern, essential solution to overcome the restraints of too little space when you need to complete a serious job.
Black Hood Rack Features:
- Adds 30 percent Storage Space
- Hood Racks allows Dumping the Bed without Loading or Rearranging Equipment
- Equipment Easily Straps to Multiple Mounting Points on Hood Rack
- Two-Piece Tubular Steel Basket
- Easy Installation; No Drilling or Tools Required
Included Items:
- (1) Black Steel Front Two-Piece Basket Rack
- (2) Extendable Tubes with Locking Bolts
- (1) Black Steel Front Riser and Light Mounting Plate
- (1) Black Steel Bumper Mount
- (2) Black Steel Front Riser Stem Assemblies
- (2) Hood Rack Brackets (left, right)
- (2) 1" Spacers
- (2) Front Clamps
- (2) Rear Clamps
- (2) Angle Brackets
- (8) 6mm-1.00 x 16mm Socket Cap Head Bolts
- (1) 6mm-1.00 x 35mm Socket Cap Head Bolt
- (1) 6mm-1.00 x 30mm Socket Cap Head Bolt
- (8) 6mm Flat Washers
- (10) 6mm-1.00 Nylock Nuts
- (4) 8mm-1.25 x 20mm Hex Head Bolts
- (8) 8mm Flat Washers
- (4) 8mm-1.25 Nylock Nuts
- (4) 8mm Split Lock Washers
- (2) 8mm-1.25 x 58mm Hex Head Bolts
- (4) 8mm-1.25 x 35mm Socket Cap Head Bolts
- (4) 8mm-1.25 x 20mm Socket Cap Head Bolts
