Unlock the full potential of your UTV with Rough Country's Forged Aluminum Control Arms for the Polaris Ranger. Stock vehicles are limited to tire height increases due to front tire-to-body contact. Our Forward Offset Control Arms eliminate those limitations and allow for up to a 30" tire with no lift required!
2" Forward Offset: By moving your front wheels 2" forward, you gain the clearance needed for up to 30" tires, with no lift kit required. Extending the wheelbase 2" also improves approach angles and provides enhanced stability and control over challenging terrains. But if you're craving an even higher stance, this control arm can be seamlessly combined with a lift kit for additional tire clearance.
Built Tough: Rough Country's Control Arms are crafted from tough forged aluminum, making them lightweight and stronger than regular tubular arms.
All-in-one Solution: With our all-in-one design, you won't need additional components such as extended tie-rods, extra steering stops, or adjustable blocks.
Easy Installation: Rough Country's Forged Aluminum 2" Forward Offset High Clearance Control Arms won't install themselves, but they're about as close as you can get.  Complete with pre-installed greaseable Heavy Duty Ball Joints and long-life rubber bushings, installation is as simple and straightforward as it gets.
With Rough Country's Forged aluminum Control Arms, you'll gain more clearance and unbeatable durability. Upgrade your Polaris Ranger today and experience the Rough Country difference.
Offset Control Arms Features:
- Allows use of 30" tires at stock height.
- 6061 Forged Aluminum.
- Light weight and durable.
- 2" Forward offset.
- 1.5" additional ground clearance.
- Easy install.
- Includes installed greaseable ball joints.
- Includes greaseable A-arm bushings and sleeves.
Includes:
- Control Arm Bushings
- Control Arm Sleeves
- Driver Upper Control Arm
- Passenger Upper Control Arm
- Driver Lower Control Arm
- Passenger Lower Control Arm
- 90° Grease Fittings
- Hardware
Note:
- 2018 Ranger 1000 High Lifter Edition, you will need stock length Ranger 1000 axles and tie rods. High Lifter Edition length axles and tie rods are not compatible with this kit.
- ONLY fits models with 62.5" wide wheel base.
