Add loads of functionality to your Polaris Ranger with the 2-Inch Receiver Winch Mount by KFI. Constructed of 3/16” steel and powder-coated after a metal bead blasting, this mount features the best possible makeup and easily takes on the harsh elements of the trail. With a simple installation, the 2-Inch Receiver Winch Mount for the Polaris Ranger elevates the performance of your UTV to a whole new level. Simply lock in your winch, and you are ready to pull your buddy out of the mud or tow a trailer full of crops. This 2-Inch Receiver Winch Mount is made entirely in the U.S.A. and fits any Ranger models from 2002-2009. Install this mount with all included hardware and easy-to-follow instructions. Take your UTV to the next level with the Polaris Ranger 2-Inch Receiver Winch Mount.
2-Inch Receiver Winch Mount Features:
- Constructed of 3/16" steel
- Metal bead blasted before powder coated for the best possible finish prep
- Powder-coated black for supreme durability
- Complete installation instructions included
- All mounting hardware included
- Made in the U.S.A.
Compatible Winches:
- KFI:ST17 / S2000 / A2000 / A2500-R2 / A3000 / U45-R2 / U45w-R2 / SE25 / SE35 / SE45-R2 / SE45w-R2
- KFI:AS-50 / AS-50w
- WARN:A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce
- WARN:VRX 25 / VRX 25-S / VRX 35 / VRX 35-S
- WARN: AXON 35 / AXON 35-S / AXON 45RC
- WARN: AXON 45 / AXON 45-S / AXON 55 / AXON 55-S
Will require Winch Spacer #101210 to fit. - WARN:RT15 / RT25 / RT30 / XT15 / XT25 / XT30
- WARN:Vantage 2000-3000lbs / Provantage 2500-3500lbs
- WARN:RT40 / XT40
- WARN:Vantage 4000lbs / Provantage 4500lbs
- RAMSEY :ATV2500 / ATV3000
- SUPERWINCH :Terra25 / Terra35 / Terra 45 / A3500 / LT2000 / LT2500 / LT3000 / LT4000ATV
- MILE MARKER :PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500
- MASTER LOCK :1500lbs #2955AT
-Requires a Fairlead with a 4.875" Bolt Pattern(available if needed #ATV-RF) - CYCLE COUNTRY:Work Power 1500 and 2500 / Powermax 2500 and 3500
- BADLAND:2-Hole Winches
- BADLAND:Standard Winches
- BADLAND:WIDE Winches
- CHAMPION:2-Hole Winches
- CHAMPION:Standard Winches
- CHAMPION:WIDE Winches
- CHAMPION:14001 and 14061
- SMITTYBILT:XRC 2.0
-Requires the correct Fairlead with a 4.875" Bolt Pattern (available if needed #ATV-RF)
-Listed Models come with incorrect ATV Roller Fairleads - SMITTYBILT:XRC 3.0 / XRC 4.0
- XGEAR:X3000 / X4000
-4-Hole Standard (3.00" x 4.875" bolt pattern) - KEEPER CORP. TRAKKER :KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000C
- VENOM:2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)
-All with 3.00" x 4.875" Bolt Pattern mount-up
- All with 3.00" x 6.600" Bolt Pattern mount-up - Traveler:2-Hole Winches
- Traveller:1078311
-Requires a Fairlead with a 4.875" Bolt Pattern(available if needed #ATV-RF) - Possibly Many others with the below standard Mounting patterns (call to confirm)
- 4-Hole (3.00" x 4.875" bolt pattern with Rollers that are 4.875" bolt pattern)
-4-Hole WIDE (3.00" x 6.60" bolt pattern with Rollers that are 6.600" or 6.000" bolt pattern)
-2-Hole (3.10" with Rollers that are 4.875" bolt pattern)
NOTE: This mount requires a Roller Fairlead Bracket that comes with most of the winches out there. If your winch kit did not come with a fairlead bracket you will need the KFI part
*NOTE: This winch mount is not compatible with SuperATV Band winches
