Everyone knows the Polaris General 1000 was built to be the ultimate beast. Sand, rocks or mud, this side by side can conquer any terrain. If it can dominate any terrain, what makes snow any different? When the cold weather starts, put your UTV to good use with the Kolpin 60 Inch Steel Blade Snow Plow.
Very few people like shoveling snow. With a 17 inch tall blade made from 14 gauge steel, you'll be done in no time! The quick pin attachment system makes it easy to leave the plow mount on your machine year round and easy attachment of the push tube and blade when needed. Underbody mounts make sure you're using the strongest part of your chassis. Check out the other great features and place your order today so you can utilize your Polaris General 4 1000 all year around.
This 17 inch tall blade is perfect for scooping up snow and getting it out of your way. Reinforced stamped and welded 14 gauge steel paired with a 6 gauge wear bar, this bad boy is designed to last through the years and take some abuse. Most people only want to know about the blade however the push tubes in this kit are pretty fantastic too. Standard Conqueror push tubes have a reinforced structural pivot box with nine (9) position angle adjustments available and quick pin attachment for easy install and removal. Check out the optional upgraded push tube and other upgrades that will make your job just that much easier!
The steel blade is 14" tall and is made of a reinforced stamped and welded gauge 14 steel. The push tube attaches quickly to the under-body for superior traction and mounts to the strongest part of the chassis to ensure a strong hold. The Standard Conqueror push tube has a reinforced structural pivot box with 9 position angle adjustments available. It has a quick pin attachment for easy installation and removal. If you're wanting to save time and work, and use your Polaris General all year round the Kolpin 72 Inch Steel Blade Snow Plow is perfect for you!
Blade Features:
- 17" tall blade
- Reinforced stamped and welded 14 gauge steel
- 6 gauge (5 mm thick) wear bar.
- 6 position adjustable skid feet.
- 20" wide blade attachment for improved push force distribution.
Push Tube and Plow Mount Features:
- Front mount
- Quick attach underbody mounts for superior traction and mounting to the strongest part of the chassis
- Standard Conqueror push tube has a reinforced structural pivot box with 9 position angle adjustments available and quick pin attachment for easy install / removal.
Optional Plow Track Extension Kit:
The Universal Heavy Duty Snow Plow Extension Kit is perfect for those needing to the extend their plow by 11 inches. Constructed of heavy-duty 7 gauge steel, this plow extender is built to last with its strategic reinforcements. No need to spend hours working on adding this accessory to your set up, it easily bolts on between the Kolpin plow and push tube in 15 minutes or less.
Optional Plow Markers:
- Sold as a pair
- Easily bolts to sides of the plow blades and increases visibility of plow edges for added safety
- 90 degree bend base
Notes:
- Must have a winch to use plow system.
- Plow Track Extension Kit is required for UTV's that have tracks.
